244820 - Intercable Latvia Sales

BRAND	Intercable
Product	244820
Description	AMX outer jacket cutter
Internal code	IMP4817177
Technical specification	including feed lever - To remove the outer jacket up to 5 mm thick from cables with an outer diameter of 16 to 54mm, Is MS cable equivalent to 30kV 630mm² single-wire or 20kV 800mm² - The cable diameter is preset using Adjusting screw in the handle, control over lasered diameter Scale on the side of the device - The fixation of the device on the cable using a quick-release system with knee lever principle - The cutting depth is adjustable from 0-5mm in 0.1mm steps - Suitable for longitudinal and round cuts - Feed using an attached ratchet wrench - Additional claw to break the insulation - Claw with protection against unintentional opening - Rotation diameter max. 300mm - ATTENTION: Not suitable for working under voltage!

Please Contact Us to Order to offer competitive prices and delivery time for Intercable - 244820 AMX outer jacket cutter number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Latvia Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

More products of Intercable

ART.NO. 244630

UFS - cutting line - set UFS - cutting line To bevel the primary insulation of medium voltage cables with diameter the primary insulation of 15mm - 60mm. Features: Anodized Lightweight, rugged design through the use of light metals, surface - - To bevel the primary isolation (2x60 °) - Positioning the cable by means of clamping system - The unit is equipped with PTFE plates for optimum sliding characteristics on the cable, thus eliminating the use of silicone paste - Replaceable blade made of hardened steel - Rotation diameter max. 200mm - Attention: not suitable for work under voltage

ART.NO. 244632

Replacement blade for 244631 Replacement Blade for UFS (17241)

ART.NO.244950

[Stripping Set 2 including adjusting handle 125200 + four Turning Heads (20 kV) of your choice]

ART.NO: 244481

HLS

Area limitation Schneider - Set HLS - area limitation Schneider For depositing the cold peelable field boundary layer of Medium and high voltage cables with insulation diameter from 16 to 41mm. Characteristics: - longitudinal, spiral and circular cut possible - positioning on the cable by means of spring-clamping system - limiting the stripping length stop means - depth of cut of 0.9 mm 0 to be set (1 dithering corresponds to 0.1mm) - by adjusting the cutting depth "0" position, the cutting depth can to max. 2mm be enlarged Application examples: MV and HV cables with cold peelable field boundary layer Equipment: - area limitation Schneider HLS AV6410 - stop AV6411 - silicone paste AG1013 - plastic case AB6400

HPI130-C2

HPI60-3

Handpresse-hydr. 60kN im Set

244950

Abisolierwerkzeuge Set 2

24470001

FBS - Feldbegrenzungsschäler

244641

9805540

VERTEILERST.F.NW 17-13-13 DBPA

9806102

T-VERTEILERSTUECK/A 22-22-22