| BRAND | Hurner Funken |
| Product | HF R 200-17 D (DS1) |
| Description | HF - centrifugal fan with direct drive |
| Internal code | IMP4667906 |
| Technical specification | manufacturer: HLU Case material: PEs Wheel material: PPs Chassis position: GR 360 Suction diameter: 200 mm Conveying medium: air Ambient pressure: 101.325 kPa Media temperature: 20 °C Suction side media density: 1.188 kg/m³ Flow rate: 1500 m³/h total pressure difference: 1450 Pa Static pressure difference: 1333 Pa Operating speed: 2850 rpm max. permit Speed of the impeller: 3331 rpm Permit Media temperature range: 0/60 °C Control type (on-site): Frequency converter Operating frequency: 49.4 Hz Inflow velocity: 14.1 m/s Circumferential speed: 51.3 m/s Sound pressure level Lp2A (1 m): 82 dB (A) Sound pressure level Lp2A (1 m) *: - dB (A) Sound power level Lw6A: 95 dB (A) Impeller efficiency: 74.9% SFP: 2272 [5] W/ (m³/s) Power requirement a.d. wave: 0.803 kW Motor power: 1.5 kW Speed - engine: 2885 rpm Voltage: 3~230/400 V Frequency: 50Hz Nominal current: 0 A Size/Size: IM B5/90S Type of protection/motor protection: IP 55/cold conductor Ex classification: II 2G Ex db eb IIC T4 Gb Motor suitable for FU: Yes Addition: - Efficiency class: IE3 ATEX Fan Ex designation: e II 3G Ex h IIB T3 Gc INSIDE requirement: Category 3 (Zone 2) Temperature class: T3 (200 °C) OUTSIDE requirement: Category 3 (Zone 2) Temperature class: T3 (200 °C) Accessories included: — 441-063-100004 Suction side cuff (diameter according to fan type) made of soft PVC with straps 1.00 pcs 441-064-100004 Cuff for pressure side (diameter according to fan type) made of soft PVC with straps 1.00 pcs 441-065-000001 1.00 set of rubber vibration dampers (loose) 441-040-000000 1.00 pcs felt ring shaft seal between housing and impeller |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Hurner Funken - HF R 200-17 D (DS1) HF - centrifugal fan with direct drive number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Latvia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
TYP: Pianhobel/315-R; N:134 430 61 230 V/ 50Hz; 1050 w
Housing material: PP Impeller material: PP Installation: Horizontal Suction: 250 mm Medium: Air Ambient pressure: 101,325 kPa Media temperature: 20 ° C Suction-side media density: 1.205 kg / m³ Flow rate: 720 m³ / h Total pressure difference: 112 Pa Static pressure difference: 101 Pa Operating speed of 2850 1 / min Max. permissible speed of the impeller. 5919 1 / min . Permissible media temperature: 0/40 ° C Control mode (by others): - Operating Frequency: 50 Hz Face velocity: 4.3 m / s Peripheral speed: 36.1 m / s Sound pressure level LP2A (1 m): 60 dB (A) Sound pressure level LP2A (1 m) *: - dB (A) Sound power level Lw6A: 77 dB (A) Impeller efficiency: 42.1%
Exhaust fan, ype axial flow 1825m3 / h Outside Pressure Loss Device 80 PE Electric Power 0,25 kW (400 V) FUNKE model that is HURNI-HFA 315
Exhaust fan,ype axial flow 850m3 / h Device External Pressure Loss 100 Pa Electric Power 0,25 kW (400 V) FUNKE model that is HURNI-HFA 250
850m3 / h 100 Pa 0,25 kW (400 V)
HF - Axialventilator
IMPELLER:HVAC SYSTEM,250MM DIA PLASTIC
MOTOR:HVAC,0.25KW,36 00 RPM 460VAC 3PH 60HZ,IM B3
1500m3/h 80 Pa 0,25 kW (400 V)
HF - Axial in efficiency-optimized premium version "blue Hfan"
HF - Axialventilator
HF - centrifugal fan with belt drive
HF - radial fan direct driven
HF - RADIAL FAN BELT DRIVEN
RF WHEEL Material: PPs-el Hub bore: Ø 19 mm Ready for installation balanced according to quality Q 6.3
RF WHEEL Material: PPs-el Hub bore: Ø 19 mm Ready for installation balanced according to quality Q 6.3
RF WHEEL Material: PPs-el Hub bore: Ø 19 mm Ready for installation balanced according to quality Q 6.3
RF WHEEL Material: PPs-el Hub bore: Ø 19 mm Ready for installation balanced according to quality Q 6.3
Radial fan direct driven
Direct driven radial fan
Radial ventilator
HF radial fan with direct drive
HF - radial fan with direct drive
PROOF FAN SELF-SUPPORTED 200M3/H
Ventilator PPS